Getting measurements on Android

Navigating to get measurements is a little different on Android than on iPhone/iPad.

How to find the measurements

1. Open the project and the model.
2. Use the boxes in the top right (one large and three small).
3. Drag the menu up to see measurements.

Three selection modes

• Door icon: shows the room in context.
• Pencil: selects a single element.
• Two sheets: drills down into details.

Exterior 3D on Android — roof and facade

On Android you can generate an exterior 3D model with measurements for roof and facade directly in the app. Enter the address, and roof surfaces, roof pitch, roof direction and wall area are retrieved — and you can get the measurements the same way as described above.

You also see the roof edges with type and length, and running metres per type. Press and hold a roof face and choose «Select several» to sum several faces or buildings. Read more in Roof measurements in the app – edges, leaving out and summing.

Note: The indoor 3D model (from LiDAR scanning) is created on a Pro device or in the browser's drawing editor. The exterior 3D for roof and facade can be generated directly in the Android app.